meta BroodMinder Pro plus kit for 4 hives features
W4 hive scale
- You will be able to track nectar flow start-up and intensity every hour. With a cellular hub the data flows directly to your smartphone. Besides raw hive weight we’re computing a rolling 24h weight variation as well as hive productivity metrics. Our algorithms also automatically detect supper addition/removal of feeding activities sorting out all the relevant information for you.
- The full weight design is mandatory when doing migration. In your yard you will not have the time to fine-tune leveling nor centering and neither ensure an homogeneous sitting of the hive. It is in this kind of ‘harsh’ configurations that single bar scales reach their limits. It is so easy to have an uneven load front/rear for example, because there is a 3 point sitting instead of 4. When you’re back home you need to be sure that the whole hive weight is captured.
- You can mount it in two ways: front/rear or left/right. The scale surface top and bottom is grooved to avoid any slip. If you’re using Nicotplast bottoms they will perfectly fit with the scale and you can add extra 4x centering pins (pre-hole already placed, simply drill with a 6.5mm bit).
- We have designed BroodMinder-W4 so it can be mounted on wooden or metal pallets. It can be screwed or pinned and stay for long installed. In normal operation for hive migration, you can load the fully stacked assembly (pallet + scales + hives) on your truck with no fear. With its 400kg nominal weight, BroodMinder-W4 is able to hold efforts far beyond any strapping you can make. As a further security, the design also contains a natural end-stop to avoid any occasional damage.
- The W4 hive-scale structure is 100% built in 4mm thick aluminum insensitive to corrosion and with no maintenance.
- Battery life is 5 years and the Bluetooth signal range is about 30 to 40 meters.
- As for any other BroodMinder device one measure is taken every hour and stored into the internal memory so that you do not miss any data.
- Works with the extensive BroodMinder wireless ecosystem and you will need a Broodminder-Cell to inspect the data in real time: this option requires a premium subscription (learn about subscription plans here).
- The data can be accessed both on mobile in BroodMinder Bees app (Android, iOs) and on the web Mybroodminder.com where you will find advanced metrics like daily weight gain and hive productivity.
- For those working collaboratively with other fellow beekeepers you can consider the apiary share feature un Mybroodminder.com. This allows you and your colleagues to mutually follow multiple apiary yards and detect any nectar flow start through your combined network of scales.
- With the premium membership your data remains fully private and only you decide and manage who can access it (read only).
BroodMinder-Cell hub is at the hearth of your remote hive-monitoring system. It is the gateway that harvests data from all the BrodMinders available in the apiary and transfers to the cloud to make it accessible in the very same moment it has been collected.
• As with your own smartphone in manual sync, the hub connects to devices in Bluetooth, stores data in a buffer, prior to sending it to the cloud through the cellular network every hour.
• The Naked T91 hub is delivered together with a SIM card and a silicon casing. It embeds a lithium battery that will last over 4 to 6 months (as for August 2022) in hourly mode. You can recharge the battery with a simple mobile phone USB charger.
• The Weather station version consists of a T91 hub installed within a weather shield. The main advantage of this version without solar kit is a lower cost combined with the opportunity to accurately measure ambient temperature, weight and pressure.
• The Solar version is delivered with a high quality solar kit including a 3.5W solar panel and a 2500mAh battery. All of it fits within a high quality IP65 plastic box that can be mounted in multiple ways. You will install the solar hub in the apiary once forever. Ambient conditions are also measured with this configuration although we do not recommend using them since they are not reliable. The box housing tends to overestimate temperatures over the day when exposed to direct sunlight (which is needed for the solar panel). As an alternative you can consider installing a dedicated weather station.
- BroodMinder T2 internal brood sensor helps to monitor the internal development of a colony: internal temperature of the hive, brood level, presence of the queen, difficulties related to eggs laying, swarming events, general health of the colony.
- Housed in a low profile, hermetically sealed wrapper, the BroodMinder T2 sits on top of your brood or super frames so that any heat created by the bees is recorded as it rises to the top of the hive. Accurate to 1 degree Fahrenheit (0.2 degree Celsius), you will notice the slightest of changes, allowing intervention before it is too late.
- All BroodMinder T2 devices now include temperature event detection (including swarms). When a temperature spike happens, the sensor switches to 1 minute sampling in order to get a high-resolution recording of the event. If you have a Cell hub or a Wi-fi hub, it will also initiate an email, text message or application alert.
- The waterproof envelope keeps the sensor away from bee activity. Without any wear and tear, you will be able to keep the device for life.
- Works with the extensive BroodMinder wireless ecosystem.
- If you own a Cell hub or a Wi-fi hub, you can inspect the data in real time: this option requires a premium subscription (learn about subscription plans here).
- You can examine the dashboards built with your beehive data thanks to the unique algorithms, at any distance from the apiary.
- The data can be accessed both on mobile in BroodMinder Bees app (Android, iOs) and on the web Mybroodminder.com.
- You can compare data from your T2 sensor with all the other BroodMinder hives on BeeCounted.org.